Decorating & Remodeling - 6 hours ago
Additional Details
though it was ceramic tile but now not sure. Must know what it is to fix 5 inch scar left by roommate using my screwdriver while high. He's gone but if I don't fix it before they find it will be booted out to. scared panel looks plastic inside the scar itself. panels was original from when building was built back in 1986.
Do It Yourself (DIY) - 6 hours ago
Additional Details
I am rebuilding a shower and the original shower did not have a sloped floor under the membrane. Should I lay one or can I skip it?
Do It Yourself (DIY) - 7 hours ago
Additional Details
Do It Yourself (DIY) - 7 hours ago
Additional Details
Can this scratch be fixed without damaging the tile more. tile installed on cement floor base back in 1986. Original tile from 1986 but basic low cost tile.
Maintenance & Repairs - 8 hours ago
Additional Details
Need torque info on Tecumseh 6 hp motor.
Maintenance & Repairs - 8 hours ago
Additional Details
I keep seeing that it should be at least 50 degrees. Does that mean it should also remain above 50 overnight, or just be 50 or more at the time of applying the paint? So, 50 for how long after applying the paint for it to come out ok?
Maintenance & Repairs - 9 hours ago
Additional Details
I'm wanting to put that stickyback drawer on the countertops because they are so old, ugly, and porus. So to keep them sanitary and appealing to the eye I'd like to put the liner on them. Will it hold up? How often should I replace?
Cleaning & Laundry - 10 hours ago
Additional Details
Other - Home & Garden - 10 hours ago
Additional Details
During the day we get tons of sunlight but I'm not sure if we're actually gaining any heat or if we're loosing it because we don't have the blinds down to act as an extra barrier?
Unfortunately I don't recall what type of windows but I do know that I can feel the warmth of the sun.
Maintenance & Repairs - 11 hours ago
Additional Details
When I put in all four fluorescent bulbs it will blink a few times a minuet, however if I replace one of the bulbs with a standard 60 watt incandescent bulb the three fluorescent and the one incandescent, all work fine. I was reading in the fan instructions about some sort of voltage limiter, is it possible that it is causing the problem?